Once you have the cabinet’s level then you need to fix it to the wall. Presuming you have a dry wall/gyprock wall, you will need to fix the cabinets to the studs. Run a stud finder against the wall above the cabinets to help locate the studs. If you don’t have a stud finder you can knock on the wall and the more solid sounding part of the wall is where a stud should be. The hollow sounding part of the wall wouldn’t have a stud behind it. Why is it important to find a stud? The ‘stud’ is the strongest part of a wall. It fixes the cabinets to the wall; it prevents the cabinet later pulling away. Drill a hole slightly smaller than the fixing screws will be through the cabinet back and wall. Do this to all the places you will need to place a screw. Screw the cabinet at the top and base to the wall to ensure its stability. Now you have your pre-drilled holes, drill the screws into the wall and cabinet. The reason why you choose a smaller drill bit then the screws are going to be to make sure the screws fit tightly. When you put your screws in tighten them just enough to hold the cabinet then check the level of the cabinets. If they are in the correct places and the level is perfect then tighten the screws so they are firm and have no chance of loosen.
So now you have your new kitchen cabinets....well not entirely. You now need to fix the doors and counter top. It is best to fix the counter top first, because this will help ensure the cabinets are soundly fitted and it is normally the heaviest part and having to take it off if you make a mistake just creates a lot more work than needed.
Depending on the type of counter top you are placing on your kitchen cabinets depends on how it should be fixed. Counter tops such as marble and granite are best left to the professionals but plastic and laminated tops are easy enough to self install. The counter top should be as simple as placing it on top of the cabinets and it should have a groove underneath to make it fit snugly. A good idea before you pop it on top is to run some heavy duty PVC glue to the top of the cabinets where it will be connecting with the counter top. Don’t put too much otherwise it will ooze out everywhere.<br />Once you have done this, grab friends to help you lift on the counter top if it is large make sure it sits in the pre-routed grooves. Give it a bit of a shake to make sure it is sturdy. Using a damp cloth wipe up any glue that has oozed out of the joins.
Now we are ready for the doors and drawers. If you fixed the hinges and drawer runners earlier it should be as simple as clipping of sliding in the drawers and doors. If you need to attach handles, pre drill the holes where they are to be placed with a drill bit smaller than the screws. Then screw on the handles so they are nice and tight.
Now you have just installed your new kitchen cabinets! A few tips are to be prepared, attain the right tools first and don’t expect to be able to complete this project in an hour.
Iven Lee
GuangZhou Kapon Cabinet Center LTD
#201,No.5 Yuanyun St., Dongchuan Rd.,
Guangzhou,510100,China
Factory:Foshan
Tel/Fax (+86) 20 34151585
Email:kapon01@hotmail.com
Msn :ivenleecabinet@hotmail.com
Website
http://www.kaponworld.com/
Modern ktichen,modern design ktichen,lacquer ktichen cabinet,china kitchen,china factory
